IF you have questions about pricing, we will refer you to this linkWe now offer ordering directly from our website.
If you need a price quote we have a simplified Quote link where you can also place your order.
If you need pricing Please follow this link since it’s the most current information we have
(or just click on that green banner at the top of the page)
And….For those sending in their injectors, complete the payment online, Print and include a copy of the invoice with your injectors to prevent any confusion when we process them.
Ship to:
DBW LLC – Shop
5737 S Graphite Way
Meridian, ID 83642
IMPORTANT: Make sure that NO SIGNATURE REQUIRED is checked, otherwise delivery will not be attempted and delivery will be delayed. Delivery Confirmation is the best option to use and will not interfere with delivery to our Drop-Box.
ATTENTION: Canadian/International customers are responsible for duty/brokerage fees required by UPS, FedEx, USPS and DHL. DBWLLC or shipments returned to us on behalf of any third party will not accept responsibility for any of these charges.
-For UPS, if declared value of cores are less than $100 no customs or duties are required, however:
-Deposits will be held for two billing cycles to insure no billable customs/brokerage fees are due.
-Unless proof is provided showing that Customs/Brokerage fees were paid by the Shipper and not “Billed to Recipient”:
-> Shipments received by DBWLLC via UPS will not be returned until a Customs clearance is provided to us proving that the shipper has paid all applicable Customs/Brokerage fees.
-> Deposits will be held for 2 billing cycles or until a customs clearance is received proving that shipment was not sent Customs collect to DBW LLC.
-If DBWLLC is billed for incoming Duty/Brokerage fees we will be happy pay these on your behalf for a nominal $25 processing fee plus applicable Customs/Brokerage expenses which will deducted from your core deposit.
Please read all of the following before proceeding with removal or installation of the injectors:
STEP 1 of installation: DBW-Injector-Removal-Procedure
STEP 2 of Installation: DBW Pump Timing Procedure
STEP 3 of Installation: IQ Adjustment Procedure
NOTE: IQ values lower than 2.8 cause conflict with the smooth idle control, IQ values above 9.5 create conflicts with the load control software and slower starting response, again on VE TDI engines only.
Review Step 1 (4.3mb File) which details how to remove and install your injectors which includes all details to insure correct installation and injector function
Note: Steps 2 and 3 should be accomplished by the Installers/owners before driving the car for best fuel economy and starting characteristics and overall performance of the engine.
Adjustments to the “IQ” and Mechanical timing are mandatory to get the best performance/highest fuel economy and cleanest combustion. This is covered under Steps 2 & 3 of the injector installation process.
We generally set flows on larger TDI injector nozzles (VE systems) to utilize an IQ value of 6.2-7.0 and 3.0-4.0 with the smaller “520” series non-Race nozzles.
_______________________________________________________
Adjustments of the Injection quantity and timing requires VCDS which can be purchased thru us: VCDS – HEX-USB+CAN
IF you need pricing details, we will refer you to this link to get pricing: